Showing posts with label mystery object. Show all posts
Showing posts with label mystery object. Show all posts

Friday, January 31, 2020

1/31/20 Report - Treasure Coast Beaches Generally Deteriorating. Mystery Find and Knives and Swords.


Written by the TreasureGuide for the exclusive use of treasurebeachesreport.blogspot.com.

Vero South Beach Friday Morning.

I went out to check some beaches this morning.  My primary interest was in Rio Mar, which I hadn't checked for a while, and I wanted to see what the high surf had done there, but when I got there I found the Rio Mar access closed for a renourishment project.  I went down to Vero South Beach, and it looked like tons of new sand had been dumped there (See above photo.).

I don't know why they think people love sand so much.  I thought it was ugly.  It wasn't the best sand either.

When I went by Pepper Park I stopped to check it out too.  I had not been there for quite a while.

Pepper Park Friday Morning.
Pepper Park didn't look good either.

I stopped at Turtle Tail on my way north.  It didn't look much different than the last time I was there when the cuts had disappeared.   I talked to a couple fellows, who weren't getting any signals.


Wabasso Beach Friday Morning.
If you notice the white sand they piled on the banks, it starts up at the park but is also in front of the Disney Resort.  Did the tax payers pay for that sand in front of Disney?  I suspect they did.


Ambersands Friday Morning.


Like the other beaches I saw this morning, Ambersands beach had deteriorated since last week.

---

Yesterday I posted a mystery item from Bob C.  Bob sent the item on a grid so we could get the size.

Mystery Item on Grid.
Photo by Craig C.
The item is about 2.5 inches long and one inch wide.  The hole appears to be a touch less than a quarter inch across.  It is said to be brass with engraving.

Bob said, "A couple people I have talked to suggested possibly off of a dagger or sword scabbard. One said there may have been a different metal "medallion" where the hole is."  

I thought it might be interesting to look at the possibility that it has something to do with a dagger or sword.  A scabbard is a sheath, so I don't think that is it.

Below is an illustration from an old Dixie Gun Works catalog showing knife handle assemblies of different kinds.



I couldn't get the left edge of the illustration in the scan, but I think it is good enough to do the job.  Notice that there are both square and round tangs.  The tang goes through the guard and into the handle.   So could the object be a guard.

Below is a picture of a bowie knife guard.  The squares are one inch, so the guard is about five inches long, a little over an inch wide, but, here is something to consider, is almost a half inch thick.




Is the mystery item sturdy enough to be a knife or sword guard.  It does not look like it to me.

Below is a picture of a couple swords.  The guard on the smallest one is still around six inches across.



Of course there are a a lot of different types of knives and swords.   At this point I'm not convinced the mystery object has anything to do with bladed weapons right now, but I'm not quite ready to totally exclude the possibility.   There are a lot of possibilities.  I might consider some others in the near future.  In the mean time, I hope you'll send your thoughts and opinions.

---

I need to do some more cleaning and research on some of my finds.

It looks like the surf will be decreasing.


Source: MagicSeaWeed.com.


Happy hunting,
TreasureGuide@comcast.net

Thursday, August 22, 2019

8/22/19 Report - One Nice Find. Ultimate Test Bed. Mystery Object Definitely Identified. Florida Beaches and A Wave.


Written by the TreasureGuide for the exclusive use of treasurebeachesreport.blogspot.com.

Gold Nugget Detected by Richard W.
Photo by Richard W.

Richard W. said, Since you’re doing some testing with the Equinox I thought you might enjoy looking at this small gold nugget I found last week on a mountain in Colorado with my Equinox 800. For size comparison I placed it on my watch for the photo. It really has some detail. I used factory settings, Gold 1 and sensitivity at 22. It rang up at 2 to 4 on target display. Hope to make it again next year to Wabasso for another hunt up and down the coast from there.

Richard W.
Woodland Park, Colorado

Thanks Richard.  Congratulations on a nice find!

---

Here are some tips from Sebastian Steve.

…  I built this first rate "Test Bed" a couple years ago, to finally have an accurate place to test and tune metal detectors.  



Simple rows of holes 4' between each row and each hole.  It is IMPERATIVE to clean out each and every metal target in the entire test bed area before even beginning.  The last thing you need is a big nail at 6" helping your dime reading, or giving you a funky double header!  Go over the ground again and again, I had 87 pieces of small metal, mostly rusted nails, but some non ferrous as well (tin clippings from the soffits, etc.)  



Holes are accurately dug as each plug was dug with a post hole digger, then a paint stick laid over the center of the top of the hole, with a tape measure going straight down the middle. Very accurate depth determination.  Then the soil at the bottom is packed and depth re-verified.  Only then is a 6" plastic disc (cut from old tupperware or the like that lunch meat comes in) laid carefully flat in the bottom.  The coin is then placed on this.  Depth now finalized... within 1/4" but always to the deeper side it not spot on.  Now we know that with the plastic disc, that the coin will 1. no longer work down deeper, and 2., the coin will not tilt.  Tilt was my main concern.  The hole is carefully filled and packed solid.  Be prepared to have some extra dirt to pack each hole fill and tight.  Then only rain and time will be needed for that all natural feel.  Granted...coins will react will and influence the soil around them, but my system gives good exposure to the surrounding soil/sands.



I have holes for an 8" and a 10" penny, same nickel, same dime, quarter is 8", 10", 12", and 14,"  These are all clad.  Anything less than 8" deep is not worth the challenge in the "Test Bed."  Then I have a 8" silver dime, and a 8" and 10" deep lead Minie'Balls.  For kicks...a brass house key at 8"  I planted a Civil War 10 pound projectile at 3.5 ft., right before heading north this summer.  This allowed me to practice on these types of deep, large targets as well.  (Note:  This was the ONLY target the Minelab Equinox with the 6" coil could NOT detect).  



___A well constructed and accurate "Test Bed" is an invaluable asset if you are serious about detecting.___  Allowing you to really know how your machine reacts to different depths and targets.  So many different ways to tune a machine.  Which is best, which combination?   What does the rain really do?  So many errors and malfunctions that a quick run past the "Test Bed" will quickly expose before heading out.  For example a failing coil or weak batteries, or corroded connector, or not tight, that may still "look" good on the meter.



The most alarming but MOST VALUABLE experiment you will learn, is that most any metal detector when subjected to a very deep coin, even silver, will read as if the coin were -rusty iron-.  Can you say GRUNT?  Every time, time and again.  That is one of the main issues I want to explore with a new or different machine.  A proper "Test Bed" will soon humble even the most experienced detectorist...just as soon as you see a silver quarter grunt like some old rusty metal when over a foot deep!  It is heartbreaking when you think..."Oh my Gosh... I wonder how many, a hundred or more signals like this, I --WALKED RIGHT ON PAST--.  Makes you think and slow down.  (:



Good Hunting,



Sebastian Steve

Thanks Steve!

---

John E.'s mystery object is now nailed down.  Mitch K. and Steve M. found the item on the internet for sale.  Here it is.

  • It is a 4 way battery post and terminal cleaner. It is a durable aluminum alloy construction, hardened and tempered springs steel post cleaners
  • 4 Way Battery Post Cleaner is designed to give leverage when cleaning battery Post and Terminals.
  • Help to removes heavy stubborn corrosion build-up on battery posts and terminals for improved electrical contact.
  • Designed to give leverage when cleaning battery post and terminals

Thanks guys!

---

Here is a little news from Brian M. on beach conditions north of the Treasure Coast.

I detect Daytona area and we are sanded in bad.  About 4 or 5 weeks ago we had about 4 or 5 feet of sand pile on the beach..

 
... the last few weeks have been real hard to find much of anything.  I went yesterday and detected a large grid in front of a nice hotel. Spent four hours hunting . I did almost the whole  hotel beach area and found two pull tabs and two bottle caps. I was thinking that maybe below the Cape may not be as sanded in . (due to the north flow.)  I have been as far north as Flagler Beach and it’s the same. We need some big surf.

Thanks for sharing Brain.  It has been a long summer of poor beach conditions.


\
Source: nhc.noaa.gov

From the nhc.noaa.gov:

1. A trough of low pressure located over the central and northwestern
Bahamas is producing disorganized showers and thunderstorms.  Some
slow development is possible by this weekend or early next week
while the system moves northwestward toward the Florida peninsula at
5 to 10 mph and then turns northeastward off the southeastern coast
of the United States.
* Formation chance through 48 hours...low...near 0 percent.
* Formation chance through 5 days...low...20 percent.
Happy hunting,
TreasureGuide

Tuesday, August 20, 2019

8/20/19 Report - Air Test Metal Detector Comparison. Mystery Object. Ghost Town Dig.


Written by the TreasureGuide for the exclusive use of treasurebeachesreport.blogspot.com.


I am going to be doing some metal detector tests on the Equinox and a few other metal detectors.

Today I did an air test comparing the Equinox with the Garrett Ace 250.

I've posted in detail about air tests and their limitations, so I won't do that at length here.  I must however remind you that what is really important is how a metal detector will function in various environments on targets in the ground.  I also have to remind you that a poor detector used well is better than a good detector used poorly.  In other words, you have to know how to use it well in the field.

Both metal detectors I used today have a variety of functions and settings.  The Equinox has more options, some of them I find very useful.  

This test was done in an environment with a good number of sources of electrical interference.  I've found that the Equinox sometimes does better in this environment with a change in frequencies.   The 250 does not have that option but does relatively well in this environment with the default settings.  I suspect I could have gotten better performance from the Equinox by changing frequencies or perhaps modifying some of the other settings.

What I used was the All-Metals mode with maximum sensitivity on the 250, and Multi-frequency, Field 1 mode on the Equinox.    No other adjustments were made.

The test targets in this case were a (1) a zinc penny, (2) a nickel, (3) clad dime (4) mercury dime, (5) clad quarter, and (6) silver quarter.

                                 Ace 250              Equinox
                                inches                 inches
Penny                        6,5                      7
Nickel                       7                         7
Clad Dime                5.5                      6
Silver Dime              6                         6
Clad Quarter             7                         7
Silver Quarter          6.5                       7

My measurements are approximate.

Near maximum distance the Equinox signal was somewhat variable.  I don't know how to describe it, but I'd say it wasn't as solid or certain.  I was conservative with my distances.

You might expect more of a difference between the two detectors given the price disparity, however once again I have to say that air tests aren't terribly meaningful.  Even though I've had very little time on the Equinox, I have come to appreciate some of the additional features and suspect it will easily outperform the Ace in wet sand.  I also suspect the Equinox would have done better if I took time to tweek the settings, but for this first comparison I wanted to go with the most basic default settings.

The Ace has a simple ID meter and the Equinox provides a conductivity readout.  Here are those readings.


                                 Ace 250              Equinox
                                    ID                Conductivity
Penny                       penny                      22
Nickel                      nickel                      13
Clad Dime               dime                        25
Silver Dime             dime                      25-26
Clad Quarter            quarter                     30
Silver Quarter          quarter                     29

The silver coins read a little lower than the same denomination clad coins.

The 13 conductivity of the nickel is like the small square pulltabs.

Conductivity readings tend to jump around a little.

I'll do more sophisticated and meaningful tests in the future and use some other metal detectors and other test targets, such as gold and artifacts.

Here a couple links for a post on air tests.

https://treasurebeachesreport.blogspot.com/2014/09/91314-report-problems-with-air-tests.html

 https://treasurebeachesreport.blogspot.com/2015/01/some-problems-with-air-tests-physical.html

I've mentioned before that you should use test targets like the kinds of objects that you'd most like to find.  If you want to find gold rings, use gold ring test targets, for example.

---

John E. found this object and wondered what it is.  I think somebody will get this one pretty quick.

It is 4 by 5.5 inches.

Mystery Object
Photo by John E.
---

A ghost town dig revealed hundreds of prehistoric artifacts.

Here is that link.

https://www.poconorecord.com/news/20190818/dig-at-pa-ghost-town-unearths-prehistoric-past

---

Maybe we'll get some new photos of Treasure Coast shipwreck salvage finds soon.

There are still no storms forming that might impact us.

Happy hunting,
TreasureGuide@comcast.net




Thursday, August 15, 2019

8/15/19 Report - Thoughts on Mystery Find. Metal Detector Conductivity Numbers and Object Identification.


Written by the TreasureGuide for the exclusive use of the treasurebeachesreport.blogspot.com.


I posted this item found by Jerry P. several days ago.  Jerry wondered what it might be.  He wondered if it might be an ink well, but I didn't mention that in my post because I didn't want to influence you.

Someone said they wish there was an object for comparison in the photo.  That might have helped.  Jerry did say that it is about three inches around.  If by that he was referring to the outside circumference of the object, it is small.  To give you some perpective, a US quarter is very close to three inches around.

I got a lot of different ideas on this object. Mitch K., who has been very accurate with his mystery item IDs, said it is probably a pet urn.

DJ thought since bronze is non-magnetic it might have been for a compass. He also thought maybe an inkwell.

Joe D. thought it would be too heavy for a snuff box, and thought maybe it held a clock or instrument.

On the ink well idea - I think that is a possibility, but if three inches is the outside circumference, it would be smaller than most. A three inch diameter would be more typical for an ink well. A typical ink well might have an opening with a three inch circumference but the pot would typically be larger than that.

Below is an 18th century ink well set that I found online. Motice that the pots are very similar to Jerry's item.




Below is a pewter pet urn.  Pet cremation urns come in a variety of sizes and shapes and are made of various materials.

Pet Urn.

Being an isolated find and having such a common shape, Jerry's item is difficult to identify.

Here, for another example, is a salt cellar.  It definitely shows some similarities to Jerry's object.

Salt Cellar.

Unfortunately I don't think we can say what Jerry's object is, although we have some good ideas for Jerry to consider.

One thing that I noticed is the clean uncorroded hinge on the object.  That doesn't seem to suggest a lot of age to me.  I'd expect to see more corrosion from a very old item coming out of the sea.

The owner of the object, knowing more about the circumstances of the find and being able to hold it, has the best chance of coming up with an ID.  He is now armed with a variety of thoughts on the subject.  Perhaps a mark or something will show up to provide additional evidence.

---

As you know I have just started to explore the Equinox metal detector.  This morning I decided to do a few conductivity tests.  I used the same test area I've used many times before. The area is subject to various sources of electrical interference.  In fact today I started out in multi-frequency mode, but then it became noisy and I switched to 15kz, which was nice and quiet.

First I tested a zinc penny and a copper penny.  The zinc penny generally came up as 21 - 22 while the copper penny showed a conductivity of 25 - 26.

Then I tested a clad dime and a silver Roosevelt dime.  The clad dime showed very slightly higher numbers than the silver dime.  Both dimes were in the 24 - 27 range.  The silver dime might have been about one point lower on average.

Next I tested a clad aquarter and a silver quarter.  The clad quarter was around 28 - 29, and the silver quarter a touch higher, at 29 - 30.

The silver versus clad coin numbers in this test were too close together for me to draw any conclusions.  The zinc penny rang up lowest, and the quarter numbers were slightly higher than the dime numbers, while the copper penny was not very different from the dimes.

I also compared a 1967 to a 1964 half dollar.  As you might expect there was very little difference.  They were in the 33 - 35 range.

Then I checked a Morgan dollar, which showed in the 35 - 37 range.  So pretty consistently, the larger denomination coins showed higher numbers than the smaller coins even though there were differences in composition.

I also tested the two rings that I showed in recent posts.  One was the small silver turquoise ring and the other the small alloy Claddagh ring.  Both gave conductivity numbers of 24.

This wasn't an extensive or even good test.  I just wanted to get some ideas on how the specific conductivity numbers might provide helpful information, so it is too early for me to draw many conclusions.

The conductivity numbers definitely help some.  For example, you can certainly tell the difference between iron and most coins, for example, but when it comes to making more precise judgements, like the difference between clad or silver coins, I'm not so sure you can do that reliably using just the conductivity readout.  It does look like you will get a different reading for zinc and copper pennies.

People often conduct their metal detector tests with US coins, but I don't know how many people are out there looking for US coins.  I think most people are more interested in finding gold jewelry, old artifacts or other types of things.  Coins do provide convenient test objects, but one thing you probably really want to know is how your metal detector responds to the types of objects that you most want to find.

If you want to find gold jewelry, gold nuggets, silver reales, or old artifacts, the best test objects are the things most like those you want to find.  If you are after gold rings, for example, be sure to test your metal detector on a variety of types and sizes of gold rings.

Many of us hunt a variety of types of objects.  That means that you should become familiar with how your detetor responds to a wide variety of types of objects.  Want to find a Rolex watch?  I'd suggest testing your detector on watches.

---

One person hoped that Glen would keep us informed about any progress he makes on his mystery object, for example if he cleans it or gets it x-rayed or finds anything else that might be related.   When people contribute their ideas they are interested and have a little investment in an object, they would like to know what happens next.  When I take the time to answer a question for someone, I hope they let me know of any additional developments.


Expect a few more days of calm surf.  There are not storms forming yet.

Happy hunting,
TreasureGuide@comcast.net




Sunday, August 11, 2019

8/11/19 Report - Two Finds for ID. One From Treasure Shores and One From the Gulf. Your Help Needed.


Written by the TreasureGuide for the exclusive use of treasurebeachesreport.blogspot.com.

Unidentified Underwater Find.
Find and photo by Glen S.
You could possibly help find a shipwreck if you can identify this find.  As you can see below, it is slightly less than one and a half feet long.

Here is an email I received from Glen s.

I have been searching for a shipwreck over here on the west coast of Florida that L.Frank Hudson gave a general location for in one of his books. Today I was metal detecting in the water offshore and found a strange iron item and some lead sheeting about a foot under the sand. Can anyone help me identify the item? Could this be part of the ship's rigging? I've attached pictures of the items. The iron piece weighs 26.6 pounds. 

Thanks.

Here are more pictures of the item and the small piece of lead sheeting.

Two More Views of the Object Found by Glen S.



Small Piece of Lead Sheeting Found With Other Object.
Find and photos by Glen S.
  Any and all thoughts and opinions on the possible use or identify of the item are appreciated.

Thanks in advance.

---

Small Bronze Pot Found by Jerry S.
Photos by Jerry S.



Here is another find for ID.  Jerry P. found it last summer near the south end of Treasure Shores beach where salvage boats were working just offshore.

Here is a bit of what Jerry said.

If you hunt long enough you will have a jar, cigar box, shoe box or in my case a large rubbermaid tote full of mystery objects... 

...sometimes an object becomes a clue and remembering where you found it is key to finding something valuable. If you don’t know don't throw and remember where you found it. Here is a mystery item from my tote...

There are no markings on it, it’s darn heavy and it’s just under 3 inches around. 


Jerry thought it might be bronze.  And as he said, just under three inches around and heavy.

It looks like maybe a lid was once attached.

He had an idea what he thought it might be, but I want to get your opinions before telling you what Jerry or I think because I want YOUR opinions.

Again, all thoughts and opinions are appreciated.

Thanks in advance.


---

It has been hot, but the water has been fine.  Now the surf is only one foot or less and that is predicted for the next week or so.

There are no new weather systems on the National Hurricane Center map.

Let me know what you think of both of the objects for ID today.

Happy hunting
TreasureGuide@comcast.net

Thursday, June 20, 2019

6/20/19 Report - Sacred Heart Imagery and Cobs. Mystery Object. Sharing and Passing on Finds. Shoe Polish Bottles.


Written by the TreasureGuide for the exclusive use of treasurebeachesreport.blogspot.com.



Here is a mystery find from John C.  As you can see it is only an inch or so across.  He says the center appears to be copper.

What do you think?

[ UPDATE:  This one has been solved.  Will have that for you tomorrow.]


===


Sacred Heart Image.


There is a good chance that you've found a pendant or item bearing the image of the Sacred Heart.

Here is an article on its symbolism and meaning.

https://aleteia.org/2018/06/08/explaining-the-strange-symbolism-of-the-sacred-heart/


I've addressed the issue of heart-shaped cobs to some extent before.



===

I have often talked about labeling and storing your finds.  It is easy to forget the details over the decades, and someday you might want to pass the items on to someone else who will appreciate them as much as you did.  In that case it will be helpful to have the information to pass along with the items.

Maybe one of your children or a relative or friend has a special interest in some of your finds.  Share what you know and what you have learned about your finds.  Share the joy and passion with people who appreciate your finds.

We all know that you can't take it with you. so you might want to leave special items to those who appreciate them.

As you probably know, a young adult member of my family passed quickly and unexpectedly away about three weeks ago, and the process of taking care of the estate has barely gotten underway.  The person that passed didn't have very much at all.  He didn't have a house of his own or hardly any possessions, unlike many detectorists who have put together nice collections over the years.  He had very little money, yet the government requires those who are in mourning to take care of the distribution of the estate, whether it is big or very small.  Just because you don't have much, doesn't mean it will be easy.

One of the best things you can do if you have a checking account or any kind of financial account is make sure you have a beneficiary or beneficiaries designated.  That can make things easier.

If you want your cherished finds to go to a good home, get a proper will made by a good attorney in your state or residence.  We all know that there are some people who will appreciate old coins, arrow heads, old bottles, or artifacts, and there are some who know nothing about them and who will throw valuable or cherished items in the garbage.  In Florida, if you have a will, it is easy enough to specify who you want to get your favorite items, but you do have list them and specify who you want to get them.  The list will go along with the will.

A minimal funeral can cost thousands of dollars.  You might want to provide for that so your loved ones don't have to deal with the details and expenses while mourning your loss.

I know that people don't usually want to think about it, but you might also want to determine who gets your favorite finds.  It is better to deal with it when you don't really have to.

Most of all, enjoy your finds today and share the information and joy that you got from them.

---

If you old enough you probably remember shining your shoes with Esquire shoe polish.  I remember doing it before church every Sunday.

I've been organizing my bottle finds and photographing them.  I've been doing mostly the more common and less valuable ones first.  

Here are a couple Esquire shoe polish bottles.

Esquire Shoe Polish Bottle.
I don't usually keep the screw top bottles, but some are so nicely embossed that I do keep them.

There would have been a cap with an attached dobber to apply the polish.

Below is the type that I remember using.

Esquire Shoe Polish Bottle
Front and Bottom.


Bottom of Same Esquire Bottle.


From Wikipedia -

During the Great Depression Sam and Albert Abrams, chemists and entrepreneurs from Brooklyn, took over an ailing boot polish maker, the Knomark Manufacturing Company of Williamsburgh, Brooklyn.  In 1938 they purchased the Esquire brand.  After a saturation advertising campaign in 1944, the company became the best selling shoe polish manufacturer in the US... In the late 1950s, they sold the Esquire brand and the 1914-built Esquire Building on 330 Wythe Avenue in Brooklyn. In 1957, Revlon acquired the Esquire brand which made annual sales of 15 million dollars. Revlon sold the Esquire shoe polish brand and other Esquire product brands in 1969...

You can see "KNOMARK INC." on the top of the bottom, but it is in the dark area.

I like the older bottle barrel shaped bottle much more then the more recent bottom one.

I'm adding some of these to my TGBottleBarn.blogspot.com web site.

Funny how you can find local history laying around everywhere.

---

No change in beach conditions.

Happy hunting,
TreasureGuide@comcast.net